Dell PowerEdge R860

Processor Up to four 4th Generation Intel Xeon Scalable processor with up to 60 cores per processor and with optional Intel® QuickAssist
Technology
Memory • 64 DDR5 DIMM slots, supports RDIMM 16 TB max, speeds up to 4800 MT/s
• Supports registered ECC DDR5 DIMMs only
Storage controllers • Internal Controllers: PERC H965i, PERC H755, PERC H355, HBA355i
• External Controller: PERC H965e
• Internal Boot: Boot Optimized Storage Subsystem (BOSS-N1): HWRAID 2 x M.2 NVMe SSDs or USB
• External HBA (non-RAID): HBA355e
• Software Raid: S160
Drive Bays Front bays:
• Up to 8 x 2.5-inch SAS/SATA (HDD/SSD) drives max 122.88 TB
• Up to 8 x EDSFF E3.S Gen5 NVMe (SSD) max 61.44 TB
• Up to 16 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives max 245.76 TB
• Up to 24 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives max 368.34 TB
• Up to 16 x 2.5-inch SAS/SATA (HDD/SSD) drives + 8 x 2.5-inch NVMe (SSD) drives max 368.34 TB
Rear bays:
• Up to 2 x 2.5-inch SAS/SATA (HDD/SSD) max 30.72 TB
Power Supplies • 1100 W Titanium 100—240 VAC or 240 HVDC, hot swap redundant
• 1400 W Platinum 100—240 VAC or 240 HVDC, hot swap redundant
• 1800 W Titanium 200—240 VAC or 240 HVDC, hot swap redundant
• 2400 W Platinum 100—240 VAC or 240 HVDC, hot swap redundant
• 2800 W Titanium 200—240 VAC or 240 HVDC, hot swap redundant
Cooling Options • Air cooling
• Optional Direct Liquid Cooling (DLC)*
Note: DLC is a rack solution and requires rack manifolds and a cooling distribution unit (CDU) to operate.
Fans • Standard (STD) fans
• Up to 6 sets hot plug fans
Dimensions • Height – 86.8 mm (3.41 inches)
• Width – 482 mm (18.97 inches)
• Depth – 883.2 mm (34.77 inches) with bezel
869.2 mm (34.22 inches) without bezel
Form Factor 2U rack server
Front Ports
• 1 x iDRAC Direct (Micro-AB USB) port
• 1 x USB 2.0
• 1 x VGA
Rear Ports
• 1 x Dedicated iDRAC ethernet port
• 1 x USB 3.0
• 1 x USB 2.0
• 1 x Serial (optional)
• 1 x VGA (optional for Direct Liquid Cooling configuration)
Internal Ports
• 1 x USB 3.0 (optional)
PCIe Up to eight PCIe slots:
• Slot 1: 1 x16 Gen5 or 1 x8 Gen4 Full height, Half length
• Slot 2: 1 x16 Gen5 or 1 x8 Gen4 Full height, Half length
• Slot 3: 1 x16 Gen5 Low profile, Half length
• Slot 4: 1 x16 Gen5 Full height, Half length
• Slot 5: 1 x16 Gen5 Full height, Half length
• Slot 6: 1 x16 Gen5 Low profile, Half length
• Slot 7: 1 x16 Gen5 or 1 x8 Gen4 Full height, Half length
• Slot 8: 1 x16 Gen5 or 1 x8 Gen4 Full height, Half length